Yes. There are two methods of placing electrical in Fabcon’s wall panel system. First, boxes and conduit can be cast into the wall panels during production. There are special considerations, so talk to your Sales Engineer. Secondly, special billets that contain an open chase can be cast into the panels easily with nominal cost. This chase runs vertically in the panels, horizontally in the case of spandrel panels, in one or all six billets (3’ wide product). Electrical can be run from the top of the wall panel or cut in above the ceiling elevation to allow electrical lines to be dropped to the appropriate elevation and electrical boxes mounted flush in the wall. Openings for electrical boxes are field-cut into the panels by others. This system allows the greatest future flexibility for electric work.