There’s more to Fabcon’s panels than a few shades of gray. Fabcon Precast gives a greater range of color than you might even be aware. By adjusting four very basic components (cement, aggregate, tinted pigments and matrix), our panels afford you a wide spectrum of color depth and nuance.
Standard finish on the wall panels is a natural gray concrete which will vary in color due to a variety of factors. Fabcon strongly recommends that natural gray concrete panels be painted or stained for aesthetic purposes. This application is not required to seal or protect the panels from air or moisture infiltration nor is it included in Fabcon’s scope of work.
Our exposed aggregate and sandblasted panels are available in a variety of aggregates, typically local to each plant location. The matrix of exposed aggregate finishes will be tinted to complement the natural color of the rock. The owner may select a different tint if so desired. Exotic aggregates can be shipped in from non-traditional sources at additional costs. However, aggregates not previously approved must be tested for compatibility and long-term viability, and this testing may impact project lead-times. White cement is another color option for exposed aggregate and sandblasted finishes.
